Друковані видання

Permanent URI for this community

https://dspace.pdau.edu.ua/handle/123456789/28

Browse

Browsing Друковані видання by Author "Gorbenko, O. V."

Now showing 1 - 5 of 5
  • Thumbnail Image
    Item
    JUSTIFICATION OF CHOOSING RECOVERY METHOD FOR CYLINDER LINERS OF AUTOTRACTOR ENGINES
    (Scientific and Educational Consulting Group "World Science", 2015) Gorbenko, O. V. ; Kelemesh, A. O. ; Горбенко, Олександр Вікторович; Келемеш, Антон Олександрович
    The article deals with the choosing of promising recovery method for cylinder liners of autotractor engines. The results of the study of wear resistance of cylinder liners using a variety of process liquids are presented.
  • Thumbnail Image
    Item
    RESEARCH OF KINEMATIC AND STRUCTURAL PARAMETERS OF WORKING TOOLS WHEN PROCESSING THE CYLINDER LINERS
    (Научно технически съюз по машиностроене, 2015) Kelemesh, A. O.; Gorbenko, O. V. ; Келемеш, Антон Олександрович ; Горбенко, Олександр Вікторович
    Viewed the theoretical questions regarding the kinematic and structural parameters of the working tool when rolling out the cylinder liner.
  • Thumbnail Image
    Item
    Research of the main parameters of the technological process of electric contact welding at the restoration of machine parts
    (Technology audit and production reserves, НВП ПП «Технологічний Центр», 2017-11) Dudnikov, A. A.; Dudnikov, I. A. ; Dudnyk, V. V.; Gorbenko, O. V. ; Kelemesh, A. O. ; Дудніков, Анатолій Андрійович; Дудніков, Ігор Анатолійович; Дудник, Володимир Васильович; Горбенко, Олександр Вікторович; Келемеш, Антон Олександрович
    The object of research is the process of restoring lancet cultivator paws by electrocontact welding of their working parts, the process connection with technological processing parameters and the physical and mechanical properties of their material. One of the most problematic places in the method of electrocontact welding when restoring the working organs of tillage machines is the lack of optimal operating parameters of this technological process of strengthening the cutting elements of working organs working in the soil-aggressive environment. Optimal parameters of electrocontact welding method of the metal mesh to the worn-out surface of the part make it possible to increase the strength of the material of the recovered parts, improve its physical and mechanical properties and increase their service life, and to reduce the magnitude and irregularity of wear. Theoretical studies of the main parameters of the technological process are carried out using the equations of mechanics of deformed bodies with their own physical and mechanical properties. In the course of the study, a steel mesh made of high-strength steel is used, and metal powders are used as a filler material, which strengthened the material of the component and increased its life. Increased wear resistance of the restored parts is obtained. This is due to the fact that with this technological process, the formation of the surface relief takes place with the formation of depressions on it, which retain the lubricant, which ensures a higher coating resistance. Due to this, it is possible to obtain a coating of parts with a thickness of up to 1.5 mm, an increase in their durability of 1.45–2.1 times and a decrease in wear intensity of 1.65 times compared to new cultivator paws.
  • Thumbnail Image
    Item
    Research of wear resistance of bronze bushings during plastic vibration deformation
    (Eastern-European Journal of Enterprise Technologies, 2017-04) Kelemesh, A. O. ; Gorbenko, O. V. ; Dudnikov, A. A.; Dudnikov, I. A.; Келемеш, Антон Олександрович; Горбенко, Олександр Вікторович; Дудніков, Анатолій Андрійович; Дудніков, Ігор Анатолійович
    Optimum design parameters of the tool for vibration deformation of bronze bushings: the punch angle β=9°; the height of the punch gauge part – 4-5 mm are obtained. For treatment of parts, the vibration amplitude of 1.0 mm, the machining allowance of 0.4 mm and the plastic deformation force of 217 N/m2 should be used. The analysis of the microstructure improvement of the parts treated by vibration deformation is presented. Under deformation, more fine grains are formed and favorable conditions for dislocation generation are created, which promotes an increase in the radial deformation rate. The obtained process parameters of vibration deformation of bronze bushings allow reconditioning of worn-out surfaces. They can also be used for treatment of new parts, thus increasing the wear resistance of operating surfaces by 1.2 times. The research results can be useful in the development and improvement of the processes of reconditioning “bushing” type parts.
  • Thumbnail Image
    Item
    Исследование процесса изнашивания корпусных деталей сельскохозяйственной техники
    (Sp. z o.o. "Nauka i studia", 2014) Gorbenko, O. V. ; Горбенко, Олександр Вікторович